Discover research from Newcastle University

Search

Request data from the catalogue

Quasi-1D BEC theoretical comparison

This shows numerical calculations of different theoretical predictions (mean-field, generalised mean field and stochastic) for the quasi-1D Bose gas including the crossover to quasi-condensation. We compare densities and correlation functions in appr...

Frequency response data for piezoelectric CDR

This work examined approaches to electronic recovery of a signal from a piezoelectric resonator and assessed frequency tracking performance and sensitivity from such an approach. The data represents amplitude and phase response traces for a circular ...

pH, power and concentration data for the oscillatory palladium-catalysed oxidative phenylacetylene carbonylation reaction at 0-40 degrees Celsius.

pH, power and concentration data for the oscillatory palladium-catalysed oxidative carbonylation reaction at 0-40 degrees Celsius showing the effect of temperature on selectivity and oscillatory pH behaviour.

Critical velocity for vortex nucleation in a finite-temperature Bose gas

The data set corresponds to the figures in the associated publication, which were the results of numerical simulations. Data for each of the figures are clearly labelled. Full details of how the data was generated are given in the associated publicat...

Electrical I-V and materials analysis data for IMF and CMF contacts

Fig.2 - Moderately doped n-Ge and p-Ge were used. Data compares IMF and CMF contact I-V curves (magnitudes), Fig.3 - Material studies : HRSEM, TEM, XRD data, Phi scan data, Fig.4 - Theta probe electron emission data, Fig.5 - Cryogenic I-V data on low...

Chipless RFID Sensor Tag for Metal Crack Detection and Characterization

Chipped radio-frequency identification (RFID) sensor systems have been studied for structural health monitoring (SHM) applications. However, the use of chip in sensor tags and its standardized narrowband operation contribute shortcomings in cost, dur...

Exploratory statistical analysis of relationships between water quality variables in Scottish Water drinking water treatment sites and climate, geographic and operational variables

The stored data comprises exploratory statistical analysis variables such as mean, median, variances and standard deviations values derived from water quality data stored in the Scottish Water Laboratory Information Management System (LIMS) covering ...

Non-equilibrium Atomic Condensates and Mixtures: Collective Modes and Thermalization

Data files (including center-of-mass, widths of atomic clouds and condensate numbers) and density profiles

Time-of-flight expansion of two-component Bose gas below and above the critical temperatures

Data files (including center-of-mass, widths of atomic clouds and condensate numbers) and density profiles

Dipole oscillation of a Bose-Einstein condensate in a uniform potential: A finite-temperature study

Data files (including center-of-mass, widths of atomic clouds and condensate numbers) and density profiles

Manufacture and characterisation of porous PLA scaffolds

The data was acquired with two different techniques, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). DSC was selected due to the information that it provides about the polymer thermal properties such as glass transiti...

Validation and applications of Nickel nanoparticle catalysis for hydration of CO2

The data was collected to validate the catalytic activity of nickel nanoparticles (NiNPs) for hydration of CO2. The data shows the catalytic activity of NiNPs using the pH drop method (as used by Mirjafari et al. Ind.Eng.Chem.Res, 2007, 46, 921), und...

Enhanced removal of Nickel (II) from aqueous solutions by SDS-functionalized graphene oxide

Adsorption experiments were conducted by stirring known amounts of Graphene Oxide (GO) or SDS-functionalized Graphene Oxide (GO-SDS) (ranging from 10 to 100 mg) with 25 mL of aqueous Ni (II) solutions (at concentrations ranging from 5 to 40 mg/L) fo...

Characterisation by UV-Visible spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, Raman spectroscopy and X-ray diffraction analysis of graphene functionalised by alanine

There remains a real need for the easy, eco-friendly and scalable preparation method of graphene due to various potential applications. Chemical reduction is the most versatile method for the large scale production of graphene. Here we report the ope...

Magnetic Resonance Imaging data evaluating a new paramagentically shifted molecular imaging agent in test objects and mice

Data consists of magnetic resonance scans using 3D Gradient Echo (3DGE) imaging and 3D spectroscopic imaging (3D-MRSI) collected in test objects to demonstrate the ability to detect a signal directly from a contrast agent molecules (rather than detec...

Numerical and analytic data for bright solitons composed of dipolar Bose-Einstein condensates

The data is based on zero-temperature, mean-field model for a dipolar Bose-Einstein condensate as provided by the dipolar Gross-Pitaevskii equation. The data relates to analytical and numerical treatments of this problem, as described in the article.

Indoor climate and qualitative interivew data exploring data as a platform for negotiating facilities management

Sensor data collected over 2-4 weeks from 3 organisations includes temperature, humidity, light, and PIR from multiple sample points in selected offices with a history of comfort complaints. Qualtiative data from focus groups with building occupants...

Quaternion weighted Fourier linear Combiner (QwFLC) Code - a MATLAB implementation

A computer programme under MATLAB that executes the QwFLC algorithm

LDPE-VBC-TMA based membranes for water electrolysis

LDPE-VBC-TMA based alkaline anion exchange membrane used with NiCo2O4 catalyst and SEBS ionomer for electrolysis at different NaOH concentration and temperature.

Integrated chemisorption cycles for ultra-low grade heat recovery and thermo-electric energy storage and exploitation

The integrated chemisorption technology driven by ultra-low grade heat for simultaneous electrical power and thermal energy storage has been investigated in this work. A resorption cycle employing low and high temperature salts, with the coupling bet...

Numerical calculation of absorption heat transformer to upgrade ultra-low grade waste heat

The data is some calculation results about the performance of a absorption heat transformer to upgrade ultra-low grade heat from 40 to 60 C , including temperature lift and system efficiency. The study was conducted to satisfy the project requirement...

An optimised chemisorption cycle for power generation using low grade heat

Based on the integrated resorption cycle with a turbine/expander for power generation, an innovative advanced resorption power generation cycle with reheating process was proposed to substantially improve the power output and energy and exergy effici...

Theoretical thermodynamic analysis on resorption power generation and pumpless ORC

Resorption power generation cycle (RPGC) has been theoretically investigated and compared with pumpless organic Rankine cycle (PORC). The PORC operates without a liquid pump in conventional ORC and shares the similar configuration with RPGC. Three di...

Non-equilibrium theoretical analysis of resorption power generation cycle with multiple expansions

The performance of the proposed multiple expansion resorption power generation cycle using three typical resorption salt pairs, including sodium bromide - manganese chloride, strontium chloride - manganese chloride and sodium bromide - strontium chlo...

Numerical calculation of sodium acetate trihydrate as seasonal solar energy storage material

The data gives the basic thermo-physical properties of sodium acetate solution and sodium acetate trihydrate, including phase diagram, density, specific heat and thermal conductivity. The simulation process of the solidification process of sodium ace...

Heating demand and available useful solar heat in different cities in the UK

The data contains three Excel documents with different return water temperatures at 30, 40 and 50 °C respectively. The calculated heating demands of dwellings in 8 different cities in the UK with different heat loss coefficients (50, 150 and 250 W/K...

Model and parameters for calculating the energy and exergy efficiency of a hybrid absorption-compression high temperature heat pump

This work explored a hybrid absorption-compression heat pump (HAC-HP) to upgrade and recover the industrial waste heat in the temperature range of 60°C–120°C. The new HAC-HP system proposed has a condenser, an evaporator, and one more solution pu...

Quantum Chemistry for Room Temperature Phosphorescence and TADF

This data includes some quantum chemistry calculations, performed with Qchem for the Room Temperature Phosphorescence and TADF molecules

Urban Observatory Environment

Continuous dataset collection since 2014 through Urban Observatory (UO) sensors. The data covers the geographical area of the North East of England centred on Newcastle upon Tyne (for geographical extent and location of sensors see http://uoweb1.nc...

Urban Observatory Weather and Climate data

Continuous dataset collection since 2014 through Urban Observatory (UO) sensors. The data covers the geographical area of the North East of England centred on Newcastle upon Tyne (for geographical extent and location of sensors see http://uoweb1.nc...

Synthesis and characterisation of new diphiosphatetrylenes

The data consist of (i) NMR spectra of the reported compounds (1H, 13C, 31P and 119Sn), including variable-temperature and solid-state spectra; (ii) UV-visible spectra of the germanium compounds in both THF and toluene; (iii) output files from DFT ca...

Data from the large MEC at Chester le Street STW

Underlying Data for the Fuel Cells publication and EPSRC funded research on: Low Temperature Domestic Wastewater Treatment in a Microbial Electrolysis Cell with 1 m2 anodes: Towards System Scale-Up. Data were collected during a four year engineering...

NMR spectra and crystallographic data on alkali metal phosphides

Room temperature and variable-temperature NMR data and X-ray crystallographic data for all compounds

Co-located Collabortitve Writing Transcripts

Anonymized Transcriptions and Analysis data from Classroom Studies for Co-located Collaborative Writing 2012-2014

Temperature with different lambda values for diesel engines

Exhaust temperature with different lambda values of the combustion chamber. Simulated flame temperature with different lambda values.

Urban Observatory Urban Sciences Building data

Direct measurements and derived information for the Urban Sciences Building, obtained from approximately 2,500 sensors within the building (e.g. room temperature, energy consumed by lifts), and a further 5,000 derivative values (e.g. heating valve po...