Discover research from Newcastle University

Search

Request data from the catalogue

Quasi-1D BEC theoretical comparison

This shows numerical calculations of different theoretical predictions (mean-field, generalised mean field and stochastic) for the quasi-1D Bose gas including the crossover to quasi-condensation. We compare densities and correlation functions in appr...

Frequency response data for piezoelectric CDR

This work examined approaches to electronic recovery of a signal from a piezoelectric resonator and assessed frequency tracking performance and sensitivity from such an approach. The data represents amplitude and phase response traces for a circular ...

pH, power and concentration data for the oscillatory palladium-catalysed oxidative phenylacetylene carbonylation reaction at 0-40 degrees Celsius.

pH, power and concentration data for the oscillatory palladium-catalysed oxidative carbonylation reaction at 0-40 degrees Celsius showing the effect of temperature on selectivity and oscillatory pH behaviour.

Iron Phthalocyanine and MnOx composite catalysts for Microbial Fuel Cell applications

The results of a slow potential scan experiment of GDC half cells with air cathodes supporting a catalytic layer of a certain catalyst in O2 saturated PBS. The results of Microbial Fuel Cell air cathodes during steady state operation and during pol...

Experimental study of the operation characteristics of an air-driven free-piston linear expander

In this research, an experimental test rig of a dual-piston air-driven free-piston linear expander (FPLE) is established using the FPE concept. A linear generator is used to convert the mechanical work of the pistons into electricity during the expan...

Critical velocity for vortex nucleation in a finite-temperature Bose gas

The data set corresponds to the figures in the associated publication, which were the results of numerical simulations. Data for each of the figures are clearly labelled. Full details of how the data was generated are given in the associated publicat...

A priori assessment of scalar dissipation rate closure for Large Eddy Simulations of turbulent premixed combustion using a detailed chemistry Direct Numerical Simulation database

Algebraic and transport equation based closures of Favre-filtered scalar dissipation rate (SDR) N, of the reaction progress variable, in the context of Large Eddy Simulations (LES), have been assessed using detailed chemistry DNS data of a stoichiome...

Electrical I-V and materials analysis data for IMF and CMF contacts

Fig.2 - Moderately doped n-Ge and p-Ge were used. Data compares IMF and CMF contact I-V curves (magnitudes), Fig.3 - Material studies : HRSEM, TEM, XRD data, Phi scan data, Fig.4 - Theta probe electron emission data, Fig.5 - Cryogenic I-V data on low...

Chipless RFID Sensor Tag for Metal Crack Detection and Characterization

Chipped radio-frequency identification (RFID) sensor systems have been studied for structural health monitoring (SHM) applications. However, the use of chip in sensor tags and its standardized narrowband operation contribute shortcomings in cost, dur...

Exploratory statistical analysis of relationships between water quality variables in Scottish Water drinking water treatment sites and climate, geographic and operational variables

The stored data comprises exploratory statistical analysis variables such as mean, median, variances and standard deviations values derived from water quality data stored in the Scottish Water Laboratory Information Management System (LIMS) covering ...

Non-equilibrium Atomic Condensates and Mixtures: Collective Modes and Thermalization

Data files (including center-of-mass, widths of atomic clouds and condensate numbers) and density profiles

Time-of-flight expansion of two-component Bose gas below and above the critical temperatures

Data files (including center-of-mass, widths of atomic clouds and condensate numbers) and density profiles

Dipole oscillation of a Bose-Einstein condensate in a uniform potential: A finite-temperature study

Data files (including center-of-mass, widths of atomic clouds and condensate numbers) and density profiles

Aptamer lateral flow assays for ultrasensitive detection of β-conglutin combining recombinase polymerase amplification and tailed primers

The experimental results/data used to create Figures 2, 3 and 5 in main publication. S-1 in supplementary information and S-3 in supplementary information (linked to figures 3 and 5). Information on how the data was collected, why it was collected an...

Ultrasensitive, rapid and inexpensive detection of DNA using paper based lateral flow assay

The repository contains the data that underpins the publication, namely, the experimental data files used to create the figures within the primary research article publication. The files are quantitative tabular data with minimal metadata.

Manufacture and characterisation of porous PLA scaffolds

The data was acquired with two different techniques, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). DSC was selected due to the information that it provides about the polymer thermal properties such as glass transiti...

Voltage, Throughput, Power, Reliability and Multicore Scaling

This repository contains original experimental data files that support the paper "Voltage, Throughput, Power, Reliability and Multicore Scaling" published in the August, 2017 issue of IEEE Computer Magazine. http://ieeexplore.ieee.org/stamp...

MyPlace: Mobility and Sight loss

The data was produced with 9 service users at Henshaws, an organisation that supports anyone with sight loss in northern England. The fieldwork was carried out using participatory research and a mobile ethnography. The data collection included worksh...

Validation and applications of Nickel nanoparticle catalysis for hydration of CO2

The data was collected to validate the catalytic activity of nickel nanoparticles (NiNPs) for hydration of CO2. The data shows the catalytic activity of NiNPs using the pH drop method (as used by Mirjafari et al. Ind.Eng.Chem.Res, 2007, 46, 921), und...

Enhanced removal of Nickel (II) from aqueous solutions by SDS-functionalized graphene oxide

Adsorption experiments were conducted by stirring known amounts of Graphene Oxide (GO) or SDS-functionalized Graphene Oxide (GO-SDS) (ranging from 10 to 100 mg) with 25 mL of aqueous Ni (II) solutions (at concentrations ranging from 5 to 40 mg/L) fo...

Characterisation by UV-Visible spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, Raman spectroscopy and X-ray diffraction analysis of graphene functionalised by alanine

There remains a real need for the easy, eco-friendly and scalable preparation method of graphene due to various potential applications. Chemical reduction is the most versatile method for the large scale production of graphene. Here we report the ope...

Magnetic Resonance Imaging data evaluating a new paramagentically shifted molecular imaging agent in test objects and mice

Data consists of magnetic resonance scans using 3D Gradient Echo (3DGE) imaging and 3D spectroscopic imaging (3D-MRSI) collected in test objects to demonstrate the ability to detect a signal directly from a contrast agent molecules (rather than detec...

Numerical and analytic data for bright solitons composed of dipolar Bose-Einstein condensates

The data is based on zero-temperature, mean-field model for a dipolar Bose-Einstein condensate as provided by the dipolar Gross-Pitaevskii equation. The data relates to analytical and numerical treatments of this problem, as described in the article.

Indoor climate and qualitative interivew data exploring data as a platform for negotiating facilities management

Sensor data collected over 2-4 weeks from 3 organisations includes temperature, humidity, light, and PIR from multiple sample points in selected offices with a history of comfort complaints. Qualtiative data from focus groups with building occupants...

Quaternion weighted Fourier linear Combiner (QwFLC) Code - a MATLAB implementation

A computer programme under MATLAB that executes the QwFLC algorithm

EMG data collected from various muscle groups while learning to use an abstract decoder.

Five channel electromyography data obtained while participants performed an abstract motor learning task. Participants used co-contraction of muscle pairs from the right hand and forearm to control a cursor. Data were collected under three experiment...

LDPE-VBC-TMA based membranes for water electrolysis

LDPE-VBC-TMA based alkaline anion exchange membrane used with NiCo2O4 catalyst and SEBS ionomer for electrolysis at different NaOH concentration and temperature.

ENG recordings in response to mechanical stimulation

Electroneurogram signals recorded from 16-channel cuff electrodes placed on the sciatic nerve of Sprague Dawley rats. The recordings were made in response to three types of mechanical stimulation, namely, proprioception, touch and nociception. The da...

ENG recordings in response to mechanical stimulation

This data supports the journal paper titled 'Influence of nerve cuff channel count and implantation site on the separability of afferent ENG'. Electroneurogram signals recorded from 16-channel and 3 -channel cuff electrodes placed on the sc...

Recordings from the L4 Dorsal Root in response to stimulation at the sciatic nerve

Bipolar recordings from the dorsal root of the rat, in response to stimulation using a multichannel cuff electrode at the sciatic nerve. Temporally-patterned pairs of electrical stimuli were delivered through 120 combinations of electrode pairs on a...

Integrated chemisorption cycles for ultra-low grade heat recovery and thermo-electric energy storage and exploitation

The integrated chemisorption technology driven by ultra-low grade heat for simultaneous electrical power and thermal energy storage has been investigated in this work. A resorption cycle employing low and high temperature salts, with the coupling bet...

Numerical calculation of absorption heat transformer to upgrade ultra-low grade waste heat

The data is some calculation results about the performance of a absorption heat transformer to upgrade ultra-low grade heat from 40 to 60 C , including temperature lift and system efficiency. The study was conducted to satisfy the project requirement...

An optimised chemisorption cycle for power generation using low grade heat

Based on the integrated resorption cycle with a turbine/expander for power generation, an innovative advanced resorption power generation cycle with reheating process was proposed to substantially improve the power output and energy and exergy effici...

Theoretical thermodynamic analysis on resorption power generation and pumpless ORC

Resorption power generation cycle (RPGC) has been theoretically investigated and compared with pumpless organic Rankine cycle (PORC). The PORC operates without a liquid pump in conventional ORC and shares the similar configuration with RPGC. Three di...

Data of parametric study centrifugally spun PHBV-fibres

Contains data of viscosity, images of Fibres morphology obtained by Scanning Electron Microscopy, fibre diameters data, Differential Scanning Calorimetry traces and tensile test results

Non-equilibrium theoretical analysis of resorption power generation cycle with multiple expansions

The performance of the proposed multiple expansion resorption power generation cycle using three typical resorption salt pairs, including sodium bromide - manganese chloride, strontium chloride - manganese chloride and sodium bromide - strontium chlo...

Numerical calculation of sodium acetate trihydrate as seasonal solar energy storage material

The data gives the basic thermo-physical properties of sodium acetate solution and sodium acetate trihydrate, including phase diagram, density, specific heat and thermal conductivity. The simulation process of the solidification process of sodium ace...

Heating demand and available useful solar heat in different cities in the UK

The data contains three Excel documents with different return water temperatures at 30, 40 and 50 °C respectively. The calculated heating demands of dwellings in 8 different cities in the UK with different heat loss coefficients (50, 150 and 250 W/K...

Model and parameters for calculating the energy and exergy efficiency of a hybrid absorption-compression high temperature heat pump

This work explored a hybrid absorption-compression heat pump (HAC-HP) to upgrade and recover the industrial waste heat in the temperature range of 60°C–120°C. The new HAC-HP system proposed has a condenser, an evaporator, and one more solution pu...

Quantum Chemistry for Room Temperature Phosphorescence and TADF

This data includes some quantum chemistry calculations, performed with Qchem for the Room Temperature Phosphorescence and TADF molecules

Data underpinning the analysis of the first carbon atlas of the state of Kuwait

The data presented in the paper "The first carbon atlas of the state of Kuwait" is presented. This data includes the raw or estimate CO2 emission sources by sector in Kuwait.

Urban Observatory Environment

Continuous dataset collection since 2014 through Urban Observatory (UO) sensors. The data covers the geographical area of the North East of England centred on Newcastle upon Tyne (for geographical extent and location of sensors see http://uoweb1.nc...

Urban Observatory Weather and Climate data

Continuous dataset collection since 2014 through Urban Observatory (UO) sensors. The data covers the geographical area of the North East of England centred on Newcastle upon Tyne (for geographical extent and location of sensors see http://uoweb1.nc...

FeedFinder: the text reviews

Data includes text reviews collected from FeedFinder (a mobile application used to support women breastfeeding outside of the home). Each review includes an additional text review box where users are able to provide information on their breastfeeding...

Generated synthetic spatial nodal configurations of real-world infrastructure systems

Generated spatial nodal configurations for numerous infrastructure systems (including, the European Air Traffic network and UK rail stations) using the algorithm proposed in “Spatial Structure and Evolution of Infrastructure Networks”.

Synthesis and characterisation of new diphiosphatetrylenes

The data consist of (i) NMR spectra of the reported compounds (1H, 13C, 31P and 119Sn), including variable-temperature and solid-state spectra; (ii) UV-visible spectra of the germanium compounds in both THF and toluene; (iii) output files from DFT ca...

Data from the large MEC at Chester le Street STW

Underlying Data for the Fuel Cells publication and EPSRC funded research on: Low Temperature Domestic Wastewater Treatment in a Microbial Electrolysis Cell with 1 m2 anodes: Towards System Scale-Up. Data were collected during a four year engineering...

NMR spectra and crystallographic data on alkali metal phosphides

Room temperature and variable-temperature NMR data and X-ray crystallographic data for all compounds

Designing bespoke VR experiences for people with dementia

This data is comprised of field notes and recorded interview data stemming from two design workshops carried out with people with dementia and their carers. With recreational VR applications coming to the market for dementia, we must consider how VR ...

Temperature with different lambda values for diesel engines

Exhaust temperature with different lambda values of the combustion chamber. Simulated flame temperature with different lambda values.

Urban Observatory Urban Sciences Building data

Direct measurements and derived information for the Urban Sciences Building, obtained from approximately 2,500 sensors within the building (e.g. room temperature, energy consumed by lifts), and a further 5,000 derivative values (e.g. heating valve po...